Advertised through PTP Recruitment

Research and Development Engineer.

Dublin

About this role

Research and Development Engineer

Job Summary

Our Client is seeking an enthusiastic and technically minded R&D Engineer to join its growing team. This role offers the opportunity to work across a diverse portfolio of medical device development projects, taking responsibility for the engineering activities that bring products from initial concepts through verification, manufacturing scale-up and commercial launch. This is an on-site role, Monday to Friday.

The successful candidate will play a key role in establishing the company’s internal engineering and testing capabilities. This includes developing novel test methods, designing and conducting verification testing, liaising with external test laboratories, investigating materials and manufacturing processes, and ensuring that products can be manufactured consistently and reliably at scale.

If you enjoy solving practical engineering problems, is comfortable working hands-on with materials and manufacturing equipment, and is motivated by seeing a product move from an initial prototype to a commercially manufactured medical device, then this is the role for you.

Key Responsibilities

  1. Test Method Development & Verification Testing:
  • Take ownership of the internal engineering and verification testing capabilities.
  • Develop, standardise and implement test methods to evaluate medical device performance.
  • Design and construct test rigs, fixtures and experimental set-ups.
  • Establish test protocols, acceptance criteria and repeatable testing procedures.
  • Conduct internal verification testing, including:
  • Pressure mapping and pressure distribution.
  • Durability and lifecycle testing.
  • Maximum load and force-displacement testing.
  • Material characterisation and mechanical testing.
  • Cleaning and environmental testing.
  • Temperature storage, altitude and transportation testing.
  • Analyse test results, interpret data and prepare technical reports.
  • Identify opportunities to improve existing test methods and develop novel, device-specific testing procedures.
  1. External Testing & Supplier Liaison
  • Manage external testing activities and support the development of the company’s technical research network.
  • Identify and liaise with external test laboratories to conduct specialist testing, including:
  • Biocompatibility / biological evaluation (ISO 10993).
  • Flammability testing.
  • Medical imaging compatibility (X-ray, CT and MRI).
  • Other material and product-specific testing.
  • Obtain quotations, review laboratory capabilities and ensure appropriate certifications and accreditations are in place.
  • Coordinate sample preparation, submission, testing schedules and technical reporting.
  • Manage relationships with external testing providers and maintain a database of approved test laboratories.
  • Support academic research projects with universities and research institutions.
  • Translate academic research outputs into practical engineering applications within the product development process.
  1. Design for Manufacture (DFM) & Production Scale-Up
  • Take ownership of the engineering activities required to transition an optimised prototype into a repeatable manufacturing process.
  • Lead Design for Manufacture (DFM) activities in collaboration with the Product Designer, Engineering and Production teams.
  • Evaluate whether prototype designs can be manufactured using existing equipment, materials and processes.
  • Identify manufacturing constraints and recommend design or process modifications.
  • Organise and oversee trial production runs.
  • Establish repeatable manufacturing parameters, including material specifications, fill weights, tolerances and assembly methods.
  • Investigate and optimise manufacturing processes involving foams, fabrics, films, silicones, plastics, composites and other materials.
  • Develop procedures and work instructions for manufacturing personnel.
  • Support process validation activities and demonstrate manufacturing repeatability.
  • Coordinate the engineering aspects of design transfer from R&D to Engineering and Production.
  1. Design Controls
  • Contribute to all stages of the Product Development Process (PDP), with particular responsibility for the engineering and verification workstreams.
  • Translate user needs and product requirements into measurable engineering design inputs.
  • Develop and maintain verification matrices, ensuring traceability between design inputs, test methods and results.
  • Support design planning, project initiation and technical file planning.
  • Prepare design verification plans, protocols and reports.
  • Participate in preliminary, interim and final design reviews.
  • Support risk management activities in accordance with ISO 14971.
  • Prepare and maintain engineering documentation, including material specifications, material safety data sheets, drawings, test reports and technical records.
  • Support design transfer and completion of the Device Master Record (DMR).
  1. Research, Materials & Technical Investigation
  • Develop internal engineering knowledge and materials expertise.
  • Conduct literature reviews and investigate relevant scientific and engineering publications.
  • Research applicable standards and regulatory requirements for new and existing products.
  • Investigate new materials, manufacturing technologies and testing methodologies.
  • Develop technical knowledge of materials used in medical devices, including foams, fabrics, films, silicones, plastics, metals and composites.
  • Maintain relationships with material suppliers and technical specialists.
  • Obtain material specifications, declarations, safety data sheets and technical information.
  • Identify opportunities to introduce new materials, improve existing products and strengthen engineering capabilities.
  1. Quality, Regulatory & Post-Market Support
  • Contribute to the ongoing maintenance and improvement of the Quality Management System.
  • Ensure engineering activities comply with the QMS and applicable medical device regulations.
  • Maintain familiarity with ISO 13485, EU MDR 2017/745, FDA 21 CFR Part 820 and relevant product-specific standards.
  • Support design change controls, CAPAs, supplier changes and technical investigations.
  • Assist with root cause analysis and testing of returned or defective products.
  • Support technical responses to queries from Sales, Marketing, Quality and external customers.
  • Assist with post-market surveillance activities and additional testing where required.
  • Participate in internal and external audits and support the implementation of resulting actions.

Qualifications

  • Education:
  • Bachelor / Master Degree in Biomedical Engineering, Mechanical Engineering, Materials Science, or related discipline.
  • Experience:
  • Minimum 1 year of relevant engineering, product development or manufacturing experience.
  • Experience working within a design control environment is highly desirable.
  • Experience in a multinational medical device company would be advantageous.
  • Technical Competencies:
  • Understanding of engineering design principles and manufacturing processes.
  • Experience with product testing, test method development or experimental design.
  • Familiarity with design controls and structured product development processes.
  • Experience interpreting engineering data and preparing technical reports.
  • Competency with CAD software, preferably SolidWorks.
  • Good working knowledge of Microsoft Excel and data analysis.
  • Desirables:
  • Experience with Design Verification and Validation (V&V).
  • Experience working with ISO 13485 and medical device standards.
  • Experience with mechanical testing and materials characterisation.
  • Finite Element Analysis (FEA).
  • Basic electronics and mechatronics knowledge, including breadboard prototyping, sensor integration, electronic components and mechanical air valve systems. Experience with controlled inflation/deflation mechanisms would be an advantage.
  • Experience designing test rigs and fixtures.
  • Experience coordinating external test laboratories.
  • Experience with manufacturing processes such as CNC machining, welding, dispensing, moulding or fabrication.
  • Soft Skills:
  • Curious, self-motivated, and creative with a practical approach to problem solving.
  • Strong written and verbal communication skills.
  • Highly organised, with close attention to detail in documentation and testing.
  • Collaborative mindset and ability to work cross-functionally with Quality, Engineering, Production teams.
  • Professional integrity and willingness to learn within a regulated environment.
  • Comfortable working independently on assigned tasks while knowing when to seek guidance.

Hours of work

Monday to Thursday 08.00 a.m. to 4.30 p.m.

Friday 08.00 a.m. to 4.00 p.m.

Similar roles

See all jobs
  • Junior Design Engineer

    Advertised by Sonas Technical

    Location
    Dublin
    Employment type
    Full time
    Salary as advertised
    €45,000 - €60,000 per year

    From this listing: Visa sponsorship is available for the right candidate

    Entry levelView role
  • Design Engineer

    Advertised by Winthrop Technologies Ltd

    Location
    Dublin
    Employment type
    Full
    View role
  • Systems Development Engineer, Amazon Foundational Security Services

    Advertised by Amazon Development Centre Ireland Ltd

    Location
    Dublin
    Employment type
    full-time
    View role
  • Principal Design Engineer

    Advertised by Cadence Design Systems (Ireland) Ltd

    Location
    DUBLIN
    View role
  • Hardware Design & Manufacture Lead

    Advertised by Analog Devices International Unlimited Company

    Location
    Dublin
    View role
  • Design Engineer

    Advertised by Egis Engineering Ltd

    Location
    Dublin
    Employment type
    Full-time
    View role
  • Senior Design Engineer

    Advertised by Egis Engineering Ltd

    Location
    Dublin
    Employment type
    Full-time
    View role
  • R&D Engineer

    Advertised by PTP Recruitment

    Location
    Dublin
    View role

Important

A WRC licence listing is official source data. It is not a government endorsement, proof of current vacancies, or proof of sponsorship capability. IrishTalents enrichment is labelled separately.
One more noteThis is general information, not legal or immigration advice. IrishTalents is not affiliated with the Irish government.